HX Nitro 3-Color Warning Feature

With the specially developed Hx Tri-colored Beacon add-on, it is now possible to use a 3-color warning device with Hx Printer devices. Example: Green, Yellow, Red. Warning lights are used in production facilities to indicate the status of devices and production. They can be mounted in any production area and are visible from a distance. Especially when a device fault or stoppage occurs, the status can be easily perceived and intervened quickly thanks to these warning lights. How the Hx Tri-Colored Beacon device works is explained below. RECOMMENDED TECHNICAL SPECIFICATIONS ARE AS FOLLOWS CONNECTIONS Connections are made through external ports (indicated by marks) via Encoder or Sensor sockets. Note: 1 warning light is installed per Hx device. If one socket is occupied, for example, if a socket is connected, the warning light can still be used. PIN CONFIGURATION The connection is specified in the figure on the side;

• Pin 5 is connected to the

Power supply (Common) pin of the external beacon.

• Pin 2 is connected to the Red light pin of the external beacon.
• Pin 4 is connected to the Green light pin of the external beacon.